Guide · Motion

Do you need motion in your sim rig?

No: a sim rig doesn't need motion to be a great way to race. Motion adds the feel of weight shifting, bumps and curbs through your seat. The MOZA HMA150 does it with four actuators, an included E-stop switch and slow descent if the power cuts out. Here is what it does, what it needs and when a static rig is enough.

GuidesUpdated By SimWerk

A SimWerk Core on MOZA HMA150 haptic motion (3D render)

Shown with optional equipment, sold separately.

Short answer

No. A static SimWerk Core or SimWerk Grand is a complete way to race. Motion is a feel upgrade: it adds weight transfer, bumps and curbs to what you see and hear. We don’t promise faster laps from it.

  • Add motion if you want the rig to move with the car and you can give it the power, the room and a Windows PC.
  • Stay static if you want the simplest start, you play on a console, or you want to put the money into a wheelbase, pedals or displays first.
  • Not sure? Discuss your space and goals with us before choosing SimWerk 4DOF or SimWerk 7DOF.

What the HMA150 does

The MOZA HMA150 is a haptic motion system with four actuators and a 3DOF platform. MOZA says it recreates pitch, roll and heave: the nose tipping up and down under braking and acceleration, the car leaning side to side in corners, and the rig rising and falling over bumps. Vibration up to 200 Hz sits on top.

MOZA HMA150 specifications as published by MOZA
Actuators4 x HMA150
Max load771.6 lb (350 kg)
Stroke5.9 in (150 mm)
Speed11.8 in/s (300 mm/s) at 551.2 lb (250 kg) payload
Acceleration>1 G at 551.2 lb (250 kg), 0.45 G at 771.6 lb (350 kg)
VibrationUp to 200 Hz

Specifications as published by MOZA Racing.

Safety

  • E-stop switch included. It stops all platform movement at once and holds the platform where it is. MOZA says that after you release it, the platform lowers to the bottom before it can restart.
  • Slow descent on power loss. If the power cuts out, built-in protection lowers the platform gradually instead of letting it drop.
  • Low-voltage design. The actuators run on 48 V DC, which MOZA describes as intended for safe home use.

What it needs

  • A Windows PC. The HMA150 runs from MOZA Motion Manager, with official presets for supported games. In our configurator it is a PC option only, so it is not offered with a PlayStation or Xbox build.
  • Power. MOZA rates the system’s power consumption at 1500 W, and it takes 110 to 220 V AC.
  • Room to be near it. MOZA rates the noise at 55 dB or less at 3.3 ft (1 m) at maximum speed and acceleration, and 58 dB or less with its official racing presets.
  • A graphics card for AI Motion. For games that don’t send motion data themselves, MOZA’s AI Motion feature needs Windows 10 or 11 (64-bit) and an NVIDIA RTX 4060 with 8 GB of video memory or better. AMD and Intel graphics cards aren’t supported for it.
  • The right seat. We recommend the Performance Racing Seat with motion: its deeper bolsters hold you in place. Every SimWerk seat ships with sliders and side brackets included.

The HMA150 fits both the SimWerk Core and the SimWerk Grand. Our sizing guide has their dimensions for planning your room.

HMA150, 4DOF, 7DOF or static

Motion options for the SimWerk Core and Grand: pricing, chassis fit and what they run from
OptionPricingFitsRuns from
MOZA HMA150MOZA’s published US price, on our motion pageCore and GrandWindows PC
SimWerk 4DOFQuotedCore and GrandWindows PC; console on request
SimWerk 7DOFQuotedGrand onlyWindows PC; console on request
Static (no motion)Nothing to addCore and GrandPC, PlayStation or Xbox, by the build

The SimWerk 4DOF and 7DOF are our own systems, quoted and installed by us. The 7DOF is full motion and needs the Grand. Example configurations include a Core on 4DOF and a Grand on 7DOF. Discuss your setup; we can help you plan the installation.

Who it suits

Makers sell motion for realism and immersion, and that is what it adds: the car’s weight moving under you, not just on screen. When we looked on October 13, 2026, we found no controlled study of lap times with and without motion, only forum posts and articles written by motion-system makers, so we leave lap time out of the case.

  • Motion makes sense if feeling the car matters more to you than the simplest setup, you race on a Windows PC and you have the power and space.
  • A static rig is enough if you play on PlayStation or Xbox, want the lowest-cost start, or would rather spend first on a direct-drive wheelbase or load cell pedals. Our wheelbase guide and pedals guide cover both.
  • You can add motion later. The Core and the Grand both take the HMA150 and the SimWerk 4DOF, so a static build doesn’t close the door.

FAQ

Questions

Does motion make you faster?

We don't promise it. Motion gives you the feel of weight transfer, bumps and curbs, and makers sell it for realism and immersion. When we looked on October 13, 2026, we found no controlled study of lap times with and without motion, only forum posts and maker-written articles. If you want to feel the car, try motion; if you want a simple start, a static rig is complete without it.

What does 3DOF mean on the HMA150?

Three degrees of freedom. MOZA says the HMA150's four actuators and 3DOF platform recreate pitch, roll and heave: the nose tipping up and down under braking and acceleration, the car leaning side to side in corners, and the whole rig rising and falling over bumps.

What happens to the HMA150 if the power fails?

MOZA built in slow-descent protection, so the platform lowers gradually instead of dropping when the power cuts out. The included E-stop switch is the other safeguard: it stops all platform movement at once and holds the platform where it is. After you release the switch, MOZA says the platform lowers to the bottom before it can restart.

How loud is the HMA150?

MOZA rates it at 55 dB or less at 3.3 ft (1 m) at maximum speed and acceleration, and 58 dB or less with its official racing presets. It runs on 48 V low-voltage DC, takes 110 to 220 V AC and is rated at 1500 W of power consumption.

Does the HMA150 need a powerful PC?

It runs from MOZA Motion Manager on Windows, with official presets for supported games. For games that don't send motion data themselves, MOZA's AI Motion feature needs Windows 10 or 11 (64-bit), an NVIDIA RTX 4060 with 8 GB of video memory or better and a recent NVIDIA driver; AMD and Intel graphics cards aren't supported for it. In our configurator the HMA150 is a PC option only, so it is not offered with a console build.

Which seat goes with a motion rig?

The Performance Racing Seat: its deeper bolsters are recommended with motion. Every SimWerk seat ships with sliders and side brackets included.

How should I choose between SimWerk 4DOF and 7DOF motion?

Motion options depend on your space and setup. Contact us to compare a SimWerk Core on SimWerk 4DOF and a SimWerk Grand on SimWerk 7DOF full motion before choosing an installation.

Where these numbers come from

  • HMA150 specs, E-stop, power-loss protection, power, noise and AI Motion requirements: MOZA Racing's HMA150 product pages (read October 13, 2026).
  • SimWerk 4DOF and 7DOF, which chassis they fit and what runs on which platform: our motion page and configurator rules.
  • Lap times with motion: we searched for a controlled study on October 13, 2026 and found only forum posts and articles written by motion-system makers.

Plan a 4DOF or 7DOF setup.

Compare a Core on 4DOF and a Grand on 7DOF. Ask us about your space, or spec your rig with or without motion in the configurator.